 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Gas furnace problems
Our furnace doesn't seem to be working properly. It won't come on when it should and it isn't blowing hot air when it should. The fan blows air. We are trying to change the thermostat to see if that is the problem and I am not sure how to choose the J2 jumper setting for a gas furnace. Do I use the black tab to cover the closet two prongs to the HG or do I cover the two prongs that are closer to the HE. The furnace seems to kick on for a minute then goes right back off.
|
||||
Check out some similar questions!
My Evcon/Coleman propane furnace is starting up but the pilot lite will not ignite... When you set it to come on it kicks on but there is no fire through the peep hole.It is about 11 years old. Does anyone have any advise on what the problem could be?
Is it possible that a thermostat operates correct all the time except when it reaches the temperature that is set doesn't maintain that temperature?:D I noticed that actually that thermostat gives a signal to the furnace but furnace doesn't turn on but that happens only when thermostat needs to...
My furnace won't come on. I have electric heat, and when I set the heat it does nothing,can someone help me?
My unit is about 9yrs old. It's an Evcon/Coleman... The problem is that when you set the temp. it will kick on but there is no fire through the little window. It will not light at all. Could something need cleaned or adjusted and if so how do I go about doing it. I am somewhat mechanically...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
