Ask Experts Questions for FREE Help !
Ask
    nct_op's Avatar
    nct_op Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 2, 2009, 02:05 PM
    Blower on, but fire goes out
    When my furnace comes on, the fire lights up, then when the blower kicks on, the fire goes out. When the blower is done, the fire comes back on. The blower only stays on for about 30secs at a time, and runs approx. 10 times a hour.
    mygirlsdad77's Avatar
    mygirlsdad77 Posts: 5,713, Reputation: 339
    Plumbing Expert
    		  
    #2

    Oct 2, 2009, 03:36 PM

    Make, model and year of furnace. Also if you could take a picture of the inside of furnace, and post it here, it would help. Sounds like you may have a honeywell fan/limit control, or other fan control that is causing your problem.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Heat blower works ac blower won't shut off. [ 1 Answers ]

Hello, I am having trouble with my RTH230B Honeywell. I have a Gas furnace and an outdoor ac unit hooked up to a blower and the blower has a heat off cool setting on a switch on it. Our when set on heat everything works as it should. BUT as soon as I turn the blower to cool it turns on and...

Blower not working and blower running all the time [ 2 Answers ]

I have a Lennox electric furnace that's about 10 years old or so, the elements come on but no blower. There is a summer fan switch that will make the blower run when switched on, but it will not come on with a call for heat. Also at my work, there is a york gas pack that is probably 15 years old....

Local fire reg vs state fire reg [ 3 Answers ]

California state law requires 100 feet of vegetation clearance with 30' cleared and 70' reduced veg. The local fire district is saying all 100' must be cleared. Can the local regulation be stronger than the state? Thank you for any help.

Inducer starts, but blower/furnace never fire [ 6 Answers ]

My furnace suddenly stopped working today. The thermostat triggers properly, and the inducer fan starts running, but furnace never fires and the blower doesn't come on. If I turn the blower on manually at the thermostat, it runs fine. The furnace is an older Payne/Carrier natural gas/forced air...

View more questions Search