 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I Have a problem on a Coleman furnace, model # DGAA070BDTA. The problem is when the furnace kicks on, it lights the hot surface ignitor and lights the burner, but as soon as the fan comes on the burner shuts down and cycles about 5 times then shuts down. I have changed the board 2 times, replaced...
I rent a double wide trailer and the furnace is the original furnace over 25 years old. At times the furnace will cycle 30+ times prior to actually kicking on to run. There is no consistency to when this happens so I can't track why. I usually keep my heat between 62-68 degrees throughout the...
I salvaged a Coleman (model # 7975a856) Heat and Air unit from an old trailer. I got rid of the air portion with the intention of using it to heat my shop. It has four wires that ran to the old thermostat. (I don’t have the old thermostat.) They are red, white, green and blue. I do not know what...
Does the upper limit switch act as a breaker? Will the red button pop up only when it needs to be reset? In other words, if the red button is not popped up does that mean it is working correctly?
I shut off furnace last spring by shutting off gas and pulling breaker. Turn the breaker back on and the blower runs with the thermo turned to off. I've tried to fire up furnace anyhow but it won't start. Only way to shut blower off is by turning off breaker. Was working fine the last time I had it...
View more questions Search
|
