Janitrol Furnace GUP075-3A Manual

simmonsal Posts: 1, Reputation: 1

New Member

Oct 1, 2009, 09:09 AM

Janitrol Furnace GUP075-3A Manual

Can we please download the manual for the above captioned furnace?

wmproop Posts: 3,749, Reputation: 91

Ultra Member

Oct 1, 2009, 09:12 AM

Go to Goodman Mfg/heating/cooling in Google

Add your answer here.

Check out some similar questions!

Janitrol furnace problems [ 13 Answers ]

I have a Janitrol furnace that is 10 yrs old. It hasn't put out near the force of air as it used to, and now it cycles out and doesn't bring the temp up to the thermostat temp. I have to turn the thermostat off and back on to get it to run more than once in awhile. It does do better if I take...

Janitrol Furnace [ 5 Answers ]

Hello - I have a Janitrol Model # GUE060-E Furnace. The blower will not shut off unless I power it off by removing the bottom panel. I hear a clicking sound like it wants to shut off. The thermostat is set to auto mode. Could it be the relay? Thanks, Dan

Janitrol Heater will not come on in Auto Mode, But comes on in Manual ON [ 5 Answers ]

I have a Janitrol Heater/AC Model GU075-3 Serial Number 870707668 When I switch the Thermostat to Auto and Heat mode the Flame in the heater ignites and about 30 to 45 sec later goes out, The blower fan never comes on. However if I switch the Thermostat from Fan Auto to Fan on The Heater Flame...

Janitrol furnace [ 4 Answers ]

I have to down to the basement and manuel turn the blower on it will not go on on auto only manuel what do you think is wrong thanks tboy56

My janitrol furnace is not responding [ 2 Answers ]

Furnace - Janitrol GMP100-3 (circa 2000) I can turn on the air conditioner and the fan, but the furnace isn't working at all. There are no pilots lit. It's like it has no power, but when I remove the panel and check the wires, I can get the red LED light to come that indicates whether the...