Ask Experts Questions for FREE Help !
Ask
    las vegas's Avatar
    las vegas Posts: 9, Reputation: 1
    New Member
     
    #1

    Sep 29, 2009, 06:18 PM
    Diode gas hot water heater
    What is the function of the diode in a gas hotwatwer heater and should it be replaced every two year
    las vegas
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Sep 29, 2009, 06:29 PM

    Only thing I can think of is that a flame rectifies and this is how to tell if there is a pilot so that the main gas valve can open.

    Otherwise, clueless.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #3

    Sep 29, 2009, 07:22 PM

    I am not questioning your knowledge of water heaters but could you be talking about an anode rod that goes into the water heater tank.

    If so they do deterioate over time and it would not hurt to check it to see if it is almost gone.

    If this is not the object of your question I apologize for my stupidity.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    Sep 29, 2009, 08:08 PM

    Letme isn't stupid, I think the poster just used or heard the wrong word. Heater have an anode , a stink rod, a sacrificial rod which protects the tank's lining from your LV water.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #5

    Sep 30, 2009, 10:16 AM

    The only other thing that I can think of where the poster would have used the word "diode" is that some of the anti-explosion water heaters have a safety cut off built into the thermocouple line that is in the heating chamber and if the flames starts to roll and over heats the heating area it will snap the protector off. This requires that the thermocouple be replaced and the problem that caused the overheating to be repaired.
    las vegas's Avatar
    las vegas Posts: 9, Reputation: 1
    New Member
     
    #6

    Sep 30, 2009, 10:40 AM
    Quote Originally Posted by letmetellu View Post
    I am not questioning your knowledge of water heaters but could you be talking about an anode rod that goes into the water heater tank.

    If so they do deterioate over time and it would not hurt to check it to see if it is almost gone.

    If this is not the object of your question I apologize for my stupidity.
    Thank you,however can you tell me the function of the anoid. Lasvegas
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #7

    Sep 30, 2009, 11:26 AM

    Water contains ions (Say sodium and clorine from salt) for instance.
    When yiou combine ions with dissimilar metals you get a battery. When you get a battery, you have corrosion.

    An example is salt used on the roads in the winter time combined with water create rust if not washed off.

    You can take a lemon and insert two disimilar metals in it and come up with a voltage or a small battery.

    There are all sorts of disimilar metals in a water system, for instance solder and copper. This has the potential of creating a small battery.

    By carefully selecting the material, usually magnesium, you can "tell" a system to preferentially corrode this. It's kind of like the path of least resistance.

    The anode is just a hunk of magnesium, sometimes other metals, that hangs in your tank. This rod corroods first, thus preventing holes in other parts of your water system. The ions are used up in the conversion.

    Chlorine ions might be sucked up by the magnesium to form Magnesium Chloride instead of, for instance, copper chloride thi preventing damage to copper plumbing.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #8

    Sep 30, 2009, 02:04 PM

    Short answer, something has to corrode and the anode is there to be the first and only thing to corrode rather than the tank. The anode is cheap and easy to replace so we call it sacrificial.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #9

    Sep 30, 2009, 06:12 PM
    Quote Originally Posted by KeepItSimpleStupid View Post
    Water contains ions (Say sodium and clorine from salt) for instance.
    When yiou combine ions with dissimilar metals you get a battery. When you get a battery, you have corrosion.

    An example is salt used on the roads in the winter time combined with water create rust if not washed off.

    You can take a lemon and insert two disimilar metals in it and come up with a voltage or a small battery.

    There are all sorts of disimilar metals in a water system, for instance solder and copper. This has the potential of creating a small battery.

    By carefully selecting the material, usually magnesium, you can "tell" a system to preferentially corrode this. It's kind of like the path of least resistance.

    The anode is just a hunk of magnesium, sometimes other metals, that hangs in your tank. This rod corroods first, thus preventing holes in other parts of your water system. The ions are used up in the conversion.

    Chlorine ions might be sucked up by the magnesium to form Magnesium Chloride instead of, for instance, copper chloride thi preventing damage to copper plumbing.
    ************************************************** ***********************

    I could not have said it any better myself, if fact I could not have said it near as well. Very good job "Keep it Simple
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #10

    Oct 1, 2009, 05:07 AM
    And here's what they're talking about. (see image)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Need help deciding between a tank or tankless water heater [ 19 Answers ]

Which one saves me money; the tankless water heater or conventional tank water heater? :confused:

Diode an amplifier? [ 5 Answers ]

Please help me out with answer... Can a diode be used 4 amplification purpose... If yes give me some specific applications... Hope my information is sufficient.:)

About Zener Diode BZX55C24 [ 4 Answers ]

Im going to ask if zener diode BZX55C24 can be replaced by IN4749 ? Both of them are 24 Volts but I don't really know if they are the same because they have same volts. I just buy this diode here at my local electronics store, I did not put any information only BZX55C24 Zener Diode and they...

Power vent water heater verus a direct vent water heater [ 2 Answers ]

I am replacing a leaking 40 gallon reliance gas water heater. The former owner put in a regular (not power or direct vent water heater) illegally. I want to replace the heater with a power vent model but there is no electricity in tbe closet. In addition, if there is a power outage, there will be...

Connecting a tankless water heater and separate hot water heater [ 6 Answers ]

What I have is this. An oil fired boiler that generates hot water for my house baseboard heating system. Contained within the boiler is a tankless heater that is heated by way of the firebox in the boiler. The tankless heater is used only for domestic hot water. It has a separate CW supply to the...


View more questions Search