Ask Experts Questions for FREE Help !
Ask
    jaime333's Avatar
    jaime333 Posts: 3, Reputation: 1
    New Member
     
    #1

    Nov 10, 2006, 06:01 PM
    Tub faucet air seal
    The other day the chrome air seal in tub came loose some gunk came out ,I just tightened it up today I have no hot water pressure could this be the cause, if so what do I do
    jaime333's Avatar
    jaime333 Posts: 3, Reputation: 1
    New Member
     
    #2

    Nov 10, 2006, 06:02 PM
    If I have no hot water pressure could this be caused by the air seal
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
     
    #3

    Nov 10, 2006, 07:51 PM
    What is the "Air Seal" and what is it attached to... is it part of the faucet... I never heard of an "Air Seal"

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Dripping tub faucet [ 2 Answers ]

How do I fix a dripping tub faucet. I have the faucet apart a couple of time but not the guts of it?

Replacing a shower/tub faucet [ 1 Answers ]

How difficult is it to replace a 1-handled shower/tub faucet with a 3-handled faucet? Do I have to make new holes in the tile? What about doing the same with a sink?

Moen Single knob tub faucet [ 2 Answers ]

Hi, Even when the knob is pushed all the way in, I have a slow drip coming from the lower spout (not the shower head). The normal knob operation is as follows: Pull for on, push to shut off, turn left for hot, turn right for cold. I removed the knob, then the circular brass plate, but I can't...

Leaky tub faucet [ 1 Answers ]

We have had a chronic leaky faucet in our deep soaker tub for a long time (over a year). We have been unable to remove the taps successfully and don't own proper tools (pliers, proper wrenches, etc.) so we have decided to call in a professional to change the fixtures altogether (they are...

Reassemble the Tub Faucet [ 4 Answers ]

I have a slip on tub faucet that was removed from the stub out. I cannot understand how to fit the components back together and reassemble so that it does not come off when the shower mechanisim is engaged. If anyone can help me, I'd love some ideas.


View more questions Search