Ask Experts Questions for FREE Help !
Ask
    cjimbrown's Avatar
    cjimbrown Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 27, 2009, 09:45 AM
    DSC P93 trouble shoot
    Hi,
    I own a DSC P93 cyber shot camera. Recently I happened to see my pictures shot were having horizontal lines all over the picture. When I shoot without flash light then it shows the image like an over exposed image. I tried to reboot the camera, format the memory stick & all means but still I find it a continuing proble. I tried with another memory stick, but still Im not able to get the problem solved.
    Thanks
    Brown:)
    fyregoddess's Avatar
    fyregoddess Posts: 15, Reputation: 1
    New Member
    		  
    #2

    Sep 27, 2009, 10:01 PM

    Are your pictures the same when you transfer the to a PC or do they look fine on the PC?If the pics look fine on pc-then you have a problem with the display on the camera-if not it could be the lens-either way it would need to be serviced.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Trouble shoot carrier heat pump [ 1 Answers ]

Turned thermostat to 65 to engage the heat pump but the fan only comes on, checked the Circuit breaker and reset the secondary breaker outside next to the pump .with out any Luck the fan only came on again. Will the fan still come on if the thermostat is not working? This fan is the furnace...

Trouble shoot jet tech f-18DP dishwasher [ 2 Answers ]

Hello my name is david i am trying to trouble shoot a jet tech dish washer with no book on it and no drawings. I have power on my power button no light on my ready light but i do have 120 vac on one side of this light that is not on and 52vac on the other side my start button has 120 vac on both...

How Do I Trouble Shoot A Boiler? [ 1 Answers ]

MY central heating boiler light is on but there is no hot water and the heating won't work either. I know there is a red re set button which I have tried pressing for 3 seconds then turned the heating back on but it didn't work. Any advice? Thanks.:)

Trouble shoot transaxle [ 2 Answers ]

Hello, dave from Wisconsin, I have , I believe to be a 1993 sears lawn mower with a spicer transmission in it. The model for the lawn mower is-- 502.255090 serial no. 28403837. When I tied putting the lawn mower into any gear the mower would not move, I checked the belts and they're fine , I...

View more questions Search