Ask Experts Questions for FREE Help !
Ask
    rwolffe's Avatar
    rwolffe Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 22, 2009, 05:19 AM
    Furnace motor bearings
    I have a Montgomery Wards Furnace, Model 700 Dual flame. Where can I find the bushings/bearings for the fan drive motor? It is a direct drive fan, meaning the fan is mounted on the motor shaft.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    Sep 22, 2009, 06:59 PM

    The only place I know of is a place that repairs electric motors. If you take them the motor or all the information off the motor they can probably fix you up.

    Also you may have a bearing store in your area but most of the time they sell only bigger bearings.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Furnace blower motor [ 10 Answers ]

I have a Climatrol Furnace, and it stopped working. I called a Heating Co, and the technician said that that the motor was bad, it's and old unit with Climatrol no longer in business. I might be able to find a used motor, but I really need a new furnace. After he left I was reaching in and I was...

Furnace Blower Motor Runs Constantly & Furnace or AC Won't Run [ 2 Answers ]

I have an Armstrong forced air (induced draft) natural gas furnace with central AC (made around 1990 -- Model: EG6H80DC14-1, Serial: A18315MNA). I had a problem at the end of the heating season where the blower motor would run continuously (even when the thermostat is turned to "off"). I thought...

Furnace blower motor [ 2 Answers ]

I need a blower motor for a 20 year old Bryant +90. Motor Model: HC43SB1100. Having trouble finding this. Is this the numbers I need or do I need the furnace numbers? Thanks, Al

Goodman furnace will ?heat motor? And blower motor will run but not at same time [ 2 Answers ]

I have a 2 year old Goodman, gas, no heat pump. There is a flashing LED that blinks once ever 4 seconds. Also, blower motor does not stay on always. We did smell something like an electrical burn. I'm guess my blower motor is fried?

Furnace not heating the house. Damper on the furnace not opening. Motor then shuts. [ 4 Answers ]

My forced-air furnace is not working correctly. The gas works heating the air in the furnace, but When the motor starts the damper doesn't open and the Motor shut down. I need suggestions?:mad:

View more questions Search