 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Water line
My dad has a well with his house and one other and I am going to hook on to it but my house is 1100ft away.
I was going to put a pump and blatter tank on at my dads well then send to my house a 1000ft away and put a 1500gal tank and another pump and blatter tank at the tank. I need to see if this will work and how do you hook these all together. |
||||
|
||||
|
Please edit your post and use a few capital letters and periods. I can't figure out what you are saying other than your house will be 1000 feet from your fathers. It looks like you want to put in two tanks and two pumps. Already edited Harold! |
||||
|
||||
|
What size pressure line are you going to use? You're going to hafta figure friction line loss into your job. How much PSI at the wellhead will the pump put out? Here's a example. Starting with 60 PSI at the well head and using 1" PVC for a service expect a loss of about 5 PSI every 150 feet. More if you're pumping up hill. If you want answers from us you're going to hafta give us something to work with. Why the 1500 gallon storage tank?
I've edited your first post and made it readable. Please pay attention to the punctuation and spacing in you next post and please give us some details to work with. Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Hello! A few years ago, I moved my washer/dryer from an inside washer/dryer inset located in my kitchen into the garage. I turned this area into a pantry and left both the hot and cold water valves protruding from the wall, as well as the 220 for the electric dryer. I'm tearing out the...
How can I fix a leak in blue plastic tubing that goes to ice maker? The leak is under the sink and tubing goes under the house to fridge on other side of room.
Here is my problem, I just bought a refrigerator that has an ice maker and water dispenser which by the way is a Haier PRCS25. I then purchased an ice maker kit from the hardware which came with a self piercing saddle valve. From here I connected the valve to a 3/4" copper cold line pipe...
I recently had a water line break in my front yard. The city replaced the line but ever since (immediately following the water being turned back on) the water pressure has been significantly lower throughout the house in both the hot and cold. I checked and the valve is completely open so I am...
We had a leak, so we had the water line and sewage line from the house to the street replaced. Now we have no water in the shower. Some debris most have clogged up the line coming into the shower. All the other lines are fine. My Dad is somewhat of a handyman and wants to fix the problem...
View more questions Search
|
