Ask Experts Questions for FREE Help !
Ask
    louarch1's Avatar
    louarch1 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 17, 2009, 01:30 AM
    Not Enough Light
    My landlord installed a harbor breeze halston II ceiling fan and light in my kitchen. However I'm limited to three 40 watt candelabra light bulbs which does not give me enough illumunation. Is there anything I can do to get more light? Feels like I'm reading in the dark.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
     
    #2

    Sep 17, 2009, 04:47 AM

    Look on the side of the bulb holder or socket, it should tell you the maximum bulb size.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #3

    Sep 21, 2009, 06:25 PM

    Candelabra base CFLs, or replacing the sockets with medium base sockets.

    Sadly, all light kits on ceiling fans now use candelabra sockets. SUCKS.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Propane Furnace won't start no pilot light red light flashes 3 times [ 6 Answers ]

My propane furnace G6RC has no visible flame and the red light either stays on or flashes 3 times in a row and then the furnace shuts off and tries to restart

99 Honda accord no parking lights or dashboard background light + SRS Light on [ 3 Answers ]

Recently I believe a problematic bulb caused a short in my car's Electrical system. The reason I say this, is that the following Problems have come up since I used the trailer... 1. SRS light is now on 2. The light that illuminates the spedometer, RPM's, and gas (background light) doesn't...

Leviton PR150 Motion LIght Control Flickers light instead of keeping them on [ 4 Answers ]

Hello, I installed a Leviton Motion Sensor Light Control (PR150). In the on position it works fine, the lights are one. But on auto it seems to only flicker the lights. They do not get to full brightness and they flash. It looks like the sensor is also acting weird as the LED light on the...

Light at own home produces sound when light at neighbor's house is switched on [ 4 Answers ]

I've moved into an apartment. I noticed that whenever I switched on my fluorescence light and when my neighbor switches on his light, my fluorescence light would produce a 'rrrrr' or 'mmm' sound which sometimes can be loud and irritating. I have tried changing the light bulb and even the ballast...


View more questions Search