Ask Experts Questions for FREE Help !
Ask
    jenschones's Avatar
    jenschones Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 14, 2009, 09:10 PM
    Garbage disposal won't stop spinning
    I accidentally dropped a screw in our garbage disposal and it made a terrible noise. I decided to unplug the unit so that I could fish the screw out. Well, I got the screw out just fine but when I went to plug the unit back in, it won't turn off. I have tried playing with the switch to see if it reversed somehow, I reset the GFI, I reset the breaker just in case that had something to do with it, and I tried pushing the reset button repeatedly. I'm not sure what else to do to get my disposal to stop spinning when it should be off. Any ideas?
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #2

    Sep 15, 2009, 10:17 AM

    It sounds like the power switch has stuck closed (i.e. ON). I suppose this could happen when the screw dropped in and the motor drew a higher-than-normal current.

    I would replace the wall switch (or wherever it is) that you normally use to turn the disposal on and off. A real clue would be if that switch feels "odd" when flipping it on and off.

    Best of luck,
    WallyH
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #3

    Sep 15, 2009, 05:26 PM

    You said you unplugged the garbage. That would mean that you have a receptacle under the sink. Bet that receptacle is a double receptacle. Also bet you didn't plug it back in to the same place you removed it from. Plug it in to the other hole.
    WallyHelps's Avatar
    WallyHelps Posts: 1,018, Reputation: 136
    Ultra Member
    		  
    #4

    Sep 16, 2009, 04:23 AM
    Quote Originally Posted by hkstroud View Post
    You said you unplugged the garbage. That would mean that you have a receptacle under the sink. Bet that receptacle is a double receptacle. Also bet you didn't plug it back in to the same place you removed it from. Plug it in to the other hole.
    Wow, good theory! I didn't catch the "unplugged" part, even though I read the problem several times.

    Hope that's it because it would be a SIMPLE fix!
    WallyH
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Garbage disposal [ 1 Answers ]

How do you fix a garbage disposal?? I have tried to reset it Anything else??

Garbage disposal [ 2 Answers ]

My garbage disposal makes a humming noise and won't turn. I tried using a broom handle that does not work. Now it is starting to get real hot.

Garbage disposal [ 1 Answers ]

The disposal won't was hall the crud down the drain

Garbage disposal [ 3 Answers ]

What is the best way to clean the garbage disposal? Sometimes I put in a lemon but it really doesn't seem to work well enough. Any products for eating away the gunk?

Garbage disposal [ 5 Answers ]

I had a garbage disposal installed in my kitchen by a plumber. Sometime when we put garbage in and turn it on it shoots out the other drain and comes up into the other sink basin. My guess is that too much garbage is being put inthere at one time and shoots it across. Also, the instructions say to...

View more questions Search