Ask Experts Questions for FREE Help !
Ask
    brcjr's Avatar
    brcjr Posts: 4, Reputation: 1
    New Member
    		  
    #1

    Sep 11, 2009, 02:43 PM
    wiring from honeywell t-stat to digital. No diagram
    I have a 10 yr old t-stat I want to repl. w/ a Globe t-stat model 59005. On the existing stat, the wires used are pink connected to X, Red to R of course, white to W2, green wire to G, orange to O, yellow to Y, and a black jumper wire from E to W2. The instruction book has several wiring diagrams, but nothing to show for the jumper wire from E to W2, and the pink wire going to X, nothing about E or X. Is there anyone that may be able to help me? I really appreciate any and all the help I can get. Thannks, because
    wmproop's Avatar
    wmproop Posts: 3,749, Reputation: 91
    Ultra Member
    		  
    #2

    Sep 12, 2009, 03:19 PM
    Are you sure the globe 59005 is for a heatpump?
    brcjr's Avatar
    brcjr Posts: 4, Reputation: 1
    New Member
    		  
    #3

    Sep 12, 2009, 03:23 PM
    After doing more research, I found that this is a cheap T-stat and I need to find a better quility one.\
    Thank you for the reply,
    Because
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring in a new honeywell t4360 frost stat [ 3 Answers ]

Can anyone tell me how to wire up this new frost stat

Honeywell T-stat #RLV430A Wiring [ 1 Answers ]

I want to replace my round manual HW t-stat, with new Prog HW RLV430A. The wires coming out of the old are red,yellow,green,white. The new only has 2 black wires. How do I combine all these? My furnace is propane forced air. Thanks!

Wiring digital t-stat to old oil burner furnace [ 1 Answers ]

I'm in the midst of replacing the original (by the look of it, 1930's-era) mechanical thermostat with a 44260 programmable digital model from Hunter. Wiring for the original thermostat: R - W - B. The W & B wires control the operation of the furnace, i.e. fire it. The R wire is for a heat...

Amana vs honeywell stat wiring [ 5 Answers ]

My system consists of a heatpump(amana ) / air /gas furnace. I'm presently using an amana stat (T874tg189910574101 ) and plan on changing to a Honeywell 7400 5-1-1. The amana stat uses terminals: e jumpered to w2 with tan wire , g , c / x , r , y , and o. The honeywell diagram only shows 5 wires...

View more questions Search