 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
patio roof
I am building a 20'x24' patio roof of treated wood and galvalum 2on12 pitch. Using 6"x6" posts every 12' on the long side Would girders made of 2x12 sandwiched with 1/2 plywood work to span the 20' across with a total of 3 girders then lay crossway 2x8x12 on 24" centers to attach the metal roofing. The roof will be a basic leantoo roof.
|
||||
Check out some similar questions!
I am getting ready to install some ventilation in my flat roof. I've decided to go with this system: Flat Roof Top Attic Ventilation. It looks perfect for my application. I've done some research on how to install the fan, including on a couple other forums, but have a couple of unanswered...
I am building a gable roof over a flat roof at our church.It is 9'wx9'l.How do I determine the height of the center rafter?
We are getting a metal roof put on our old house. This means that the snow will slide off and land onto our air source heat pump. We need to construct a small roof to protect it. We were thinking of extending the 2 x 6 roof rafters another 4 feet and then having 2 x6 or 4 x 4's going back to the...
Hurricane Andrew & Gustav has convinced me to put a metal roof. I'm too old to keep patching shingles. I'm undecided : on using treated 1 x 4 lats directly over shingles (parallel to ridge), screwed to rafters and metal screwed to lats or
We are building a three season attached screenroom. We are uncertain how to attach the gable roof to the present roof (gabled in the opposite direction, so the attachment is on the flat side). We have spent hours trying to locate do it yourself instructions and can only find do it yourself kits...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
