Ask Experts Questions for FREE Help !
Ask
    lcllafa's Avatar
    lcllafa Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 9, 2009, 02:56 PM
    Motion light
    I would like to convert my 110v motion light into 220v motion light. Can I rewire it or change something to make it 220v?
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Sep 9, 2009, 03:03 PM

    No, why would you want to.
    stanfortyman's Avatar
    stanfortyman Posts: 5,598, Reputation: 279
    Electrical & Lighting Expert
    		  
    #3

    Sep 9, 2009, 03:07 PM
    I agree. Would could you possibly need this for?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Motion detector for a flash of light [ 3 Answers ]

I want to construct a motion detector that will fire lights and a horn on a car grill and fender for a halloween effect. I only want it to last 3 -5 seconds then turn back off. Can you help me with a design?

Motion flood light replaceing [ 1 Answers ]

I have a motion sensored flood light that I have to replace. Is this easy? When it comes to the "wiring" what do I do? I do not have a breaker to turn the power to it on and off also. Thanks

Motion light keeps turning off and on, on it's own? [ 4 Answers ]

I recently installed the Leviton decora PR180 in my hallway with a 3 pole setup. I followed the instructions as best as I could understand, but when turned on auto, the light comes on for 15 seconds, goes off, and within 5 seconds, goes back on. Did I wire it incorrectly, or is it defective? ...

Leviton PR150 Motion LIght Control Flickers light instead of keeping them on [ 4 Answers ]

Hello, I installed a Leviton Motion Sensor Light Control (PR150). In the on position it works fine, the lights are one. But on auto it seems to only flicker the lights. They do not get to full brightness and they flash. It looks like the sensor is also acting weird as the LED light on the...

View more questions Search