Ask Experts Questions for FREE Help !
Ask
    camper1500's Avatar
    camper1500 Posts: 1, Reputation: 1
    New Member
     
    #1

    Sep 9, 2009, 11:58 AM
    Mower electrical drawing
    I have an old craftsman rider mower Im rebuilding. I need an electrical drawing of the wireing for it. It is a m odle number 91725120. It has an solid state system but uses a old voltage terulator. It lwo uses a key switch that take s the full battery load to start it. In other words , no solined at all. I would like to elimate the voltage regulator and replace the key switch and add a sollinoid to it. I also need to know how to check the coil and what they call the mag on it. Any help would be appricated . Thanks Don
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #2

    Sep 9, 2009, 03:37 PM

    Your best bet is to get an original manual via https://www.askmehelpdesk.com/other-...ng-394881.html
    Bet you didn't know your mower was built by Electrolux did you?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #3

    Sep 10, 2009, 08:18 AM

    Hi,
    That is an old machine - 1967, see:
    newsuburban
    And finding a manual will be difficult. There are places to look. In a search engine of choice try "vintage Sears garden tractor" for the terms. It is actually an old Roper.
    You will not be able to do away with the original electrical system easily. And do be careful with it as the two pieces to that Solid State ignition are very pricey.
    The Delco-Remy regulator manual is available.
    Peace,
    Clarke
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #4

    Sep 10, 2009, 09:05 AM

    Hi,
    Actually did find this:
    Peace,
    Clarke
    Attached Images
     

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Murray 11/36 riding mower electrical parts [ 6 Answers ]

I need to know where the condenser is located on the older Murray rider 11/36. Says its model 7-36519 0n chasis but can't find that anywhere

Electrical Problem Murray Riding Mower [ 8 Answers ]

I was given a Murray Riding Mower that had nothing when the key was turned . I replaced the blade disengage safety switch and the mower started. I get nothing again when the key is turned. I replaced the cellenoid, battery, BDS switch again, and had the starter checked. The seat safety was...

Murray riding lawn mower electrical problem [ 7 Answers ]

My mower runs but only as long as the battery has a charge. And then it dies, so what could be the problem? Please help I have a huge lawn and a push mower just doesn't get it!!

Mtd mower 12hp electrical problems [ 1 Answers ]

I have a 12hp mtd mower that has some electrical problems. I replaced the ignition switch, solenoid, and battery, plug. When I turn the key nothing happens. There is power going into one side of the solenoid but not the other. Nothing eilse seems to get power beyond the solenoid. Starter is...


View more questions Search