Ask Experts Questions for FREE Help !
Ask
    painter_2009's Avatar
    painter_2009 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 8, 2009, 10:46 AM
    How to start
    Hello my name is rachael I live in sc and I want to know what I have to do to get started with a painting company
    Clough's Avatar
    Clough Posts: 26,677, Reputation: 1649
    Uber Member
    		  
    #2

    Sep 8, 2009, 02:12 PM
    Hi, Rachel!

    I moved your question out of Introductions to this section so that it will get noticed more by those best able to answer it. Introductions is for people to introduce themselves only, and we try to not ask questions there.

    Concerning your question, are you wanting to know how you start a painting company or to get involved with an existing painting company?

    Thanks!
    justbcuz's Avatar
    justbcuz Posts: 7, Reputation: 1
    New Member
    		  
    #3

    Sep 8, 2009, 02:31 PM
    Contact your local chamber of commerce and find out if there are any legal requirements to starting your own company. If you intend to keep your company small you may be able to do it as a handyman/women and keep your billing under 500 dollars or the limit that is set by the state. So if you have a job that will pay 2000 dollars you would bill in 4 increments of 500 dollars so that you would stay legal. Good luck .
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore dryer won't start could be start button or timer [ 1 Answers ]

Please help me with this. My dryer was working good and now it won't start at all.

No HSI start GMNT Goodman Janitrol No flame start [ 1 Answers ]

I have a Janitrol (Goodman) furnace, and the controller board indicates 3 blinks. The flame blower starts, but it never gets to HSI (the ignitor never starts heating up). I've changed the controller board, and same issues. I've been through every sensor (bypassing all of them), and still no...

Lawn mower won't start , changed Plug , but Still won't Start [ 2 Answers ]

My lawn mower won't Start , I tried Changing the Plug , But still won't Start

Can't start my Poulan chainsaw. Start rope too hard to pull. [ 1 Answers ]

Can't start my chainsaw because the start rope is too hard to pull out. Pulling the rope causes a jerky action.

Tractor won't start with key - but I can jump starter to start [ 2 Answers ]

I bought a used Ford 1210 compact tractor and it will not start with the key. I replaced the switch and still no luck. Tested the safety switch & wire that goes to the starter and both are in good order (verified with ohm meter). When I try to start with the key, the lights dim some so I can see...

View more questions Search