Ask Experts Questions for FREE Help !
Ask
    jansenmotors's Avatar
    jansenmotors Posts: 8, Reputation: 1
    New Member
    		  
    #1

    Sep 7, 2009, 08:53 AM
    Timing chain 2.7 dodge
    I did a water pump in a dodge intriped 2.7 when I took the timing chain of one of the cams jumped qickly . When I put every thing back I tried to turn over by hand it only turn a little over a1/4 turn then lock up did I mess up

Check out some similar questions!

Altima timing chain replacement [ 6 Answers ]

What is the recommended milage to replace timing chain on a Nissan Altima?

Timing chain slack [ 5 Answers ]

I have a 72 gmc trunk with a 350 small block.I just changed my timing chain because the old chain had slack and was hitting the cover.so now that I've put the new one there seems to be slack in the new one.so what can be done to fix this problem. Thank you

2002 Ecotec engine with a broken timing chain [ 2 Answers ]

Is my 2002 Pontiac Grand Am 4 cylinder, 2.2 liter "Ecotec" engine interfering or non-interfering in the case where my timing chain has broken? Thank you for your help. Md

Altima 2004 timing belt or chain [ 2 Answers ]

Does the 2004 Altima have a timing belt or timing chain?

Timing chain? [ 2 Answers ]

?? My '72 Bonneville has begun to diesel when accelerating. It began just when really pressing hard, but now does it on slow starts from a stop sign. I've put high octane in it, to no avail. It currently has 122K; does it sound like the timing chain's slipped?

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.