Ask Experts Questions for FREE Help !
Ask
    deltablUtim's Avatar
    deltablUtim Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 5, 2009, 05:04 AM
    Shower, Hot water stopped working
    I have a Grohmaster Grohsafe EV 35 237 shower which suddenly will not work with hot water. All other taps in the house work fine just not the shower. I have tried bleeding the system to no avail. Any ideas?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Sep 5, 2009, 06:11 AM
    Shut the water off to the valve, (I have put up a image to help you) and open up the valve. Remove the cartridge and check and clean the inlet ports. Now turn the hot water on for a bit to flush out the supply. You should see a strong stream when you do this. If not click on back and tell me about it. Reassemble and test. Better now? Good luck, Tom
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 70 Series wash machine cold water cycles stopped working today. [ 2 Answers ]

My Kenmore 70 Seriies Heavy Duty Super Capacity Plus wash machine's cold water cycles stopped working today. The hot water cycle (only) works, but any cold water cycle does not work. The cold water line is open. What is likely wrong and how do I fix it?

Moen hot water in shower stopped [ 4 Answers ]

I have what looks very much like model 82683 PosiTemp (http://www.moen.com/shared/pdf/instruction_sheets/INS898C.pdf) The difference is on the website the handle appears round but mine is tear drop shape. This is a 2 year old house and this particular bath tub was not used for many months. Now the...

Kirkland Signature, by whirlpool; Dryer stopped heating and timer stopped working [ 2 Answers ]

I have a Kirkland Signature, by whirlpool Dryer that stopped heating and timer stopped working at the same time. What may have caused this?

Buderus gas water heater - low water light on & stopped working after 3 months [ 1 Answers ]

Hello! We had a Buderus gas water heater installed in October 2008 (for both hot water and heating). It worked fine until a few weeks ago, when it stopped working suddenly, and the sensor showed that there wasn't enough water (low water light was on); after a couple of hours (or less), it...

Hot water is not working in shower [ 2 Answers ]

When I turn my tub faucet on there is not hot water. The cold water runs fine but when I turn it to hot, there is no water

View more questions Search