Ask Experts Questions for FREE Help !
Ask
    DMAKSA's Avatar
    DMAKSA Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 4, 2009, 02:08 PM
    Weed Eater will not stay running
    I have a Weed Eater model GTI 19T that will not run longer than a few seconds. Any suggetions?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Sep 4, 2009, 04:15 PM

    Hi,
    My first place to start is to replace the inlet screen on the pump side of the carb. Their part #35178 (yes, I know there are numbers before that, but a good dealer will probably know what you are asking for - number and actual part) or Walbro part #140-70 or it is in the kit #K10-WAT (most common.)
    Peace,
    Clarke

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Weed Eater Lawnmower won't stay running [ 5 Answers ]

I have a Weed Eater Briggs and Staton 300 push mower. I've changed the spark plug and cleaned the Air Filter. Lawn mower will start but immediately shuts off. Any advice?

Poulan Weed eater won't stay running [ 2 Answers ]

I have a Poulan Weedeater Featherlite Plus that will not continue to run. It seems as though the tank gets pressurized and when I open the gas cap there is a surge of air into the tank. I don't know if this is supposed to happen or not. There are 2 tubes into the gas tank from the carburetor. One...

Rough running weed eater string trimmer [ 3 Answers ]

I have a Poulan/Weed Eater model FL20 string trimmer that is hard starting and will not run up to speed. It seems to be an air/fuel mixture problem, but there are no adjustment screws except idle adjustment. This model cost only about $65. Can the problem be fixed cheaply?


View more questions Search