Ask Experts Questions for FREE Help !
Ask
    pipefitterrobb's Avatar
    pipefitterrobb Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Sep 3, 2009, 06:38 PM
    Dead cylinder#4.acura integra 1.8
    I installed used motor.I have dead cylinder.I verified good spark,compression.I replaced fuel injector thinking that it was clogged... could it be a valve that needs adjusted? A sticking valve?.
    pipefitterrobb's Avatar
    pipefitterrobb Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Sep 3, 2009, 07:01 PM

    I also checked for injector pulse at connector and its getting open/close signal...
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

1991 acura integra [ 4 Answers ]

Hi I have another question for you. I have a 1991 Acura Integra with a idling problem. I've check the vacuum lines they were all good and I've also change my idle air control valve three times to make sure that wasn't the problem. I put another engine in the car but the person I bought the car off...

1991 Acura Integra [ 4 Answers ]

Hello all My nephew has a 1991 Acura Integra. My parents have replaced the engine, the distributor, wiper motor. When attempting to start the car and it runs through its checks IF the engine light stays on it won't start. You have to "feather" the accelerator to get it to 2000 rpms before it...

View more questions Search