Ask Experts Questions for FREE Help !
Ask
    robinwood402's Avatar
    robinwood402 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2009, 05:51 PM
    Airspan ceiling fan remote
    I just bought an 69"Airspan ceiling fan from Harbour Breeze. It did not come with a remote and they sent me one. How do I get the covers off the fans to check the remotes settings? The light works but not the fans.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
    		  
    #2

    Jul 29, 2009, 07:23 PM

    No cover, its inside the canopy or ill be once you install it there. So to be sure I understand you right, you got the remote separately and then installed it, right so far? The receiver is the box you put inside th canopy and it has about 9 little dip switches wjhich must match the 9 switches inside the hand held remote transmiter under the battery cover.
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
    		  
    #3

    Sep 2, 2009, 08:37 PM

    If it works the lights the codes are fine and there is some other issue. Make sure the wires are hooked up correctly.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to change ceiling fan remote batteries on a hamilton bay remote control unit [ 3 Answers ]

Before I break the darn thing, can you tell me if the back panel comes off or if I have to unscrew the top and bottom screws?

Instructions for Harbor Breeze 69" Airspan ceiling fan [ 6 Answers ]

We purchased a Harbor Breeze 69" Airspan ceiling fan from Lowe's. It was a display model and does not have instructions included. It is already put together but we would like to change the blades from light maple side to silver side. How do you remove the blades?

Remote Ceiling Fan- Lost REmote [ 2 Answers ]

I have a remote ceiling fan - the remote is lost- it has no pull on and off - is there a backup way to turn this fan on and off?

How to wire from ceiling to remote to ceiling fan [ 2 Answers ]

Ok, so here's a summary: I installed a Harbor Breeze Airspan 69" fan, it was mostly pretty simple, but it was the first ceiling fan I've installed that was remote only (no switches). So upon completion the motors for each fan worked, even all the different speeds, but the light did not come...

Harbor Breeze AirSpan fan problem [ 1 Answers ]

I just installed a Harbor Breeze AirSpan fan. When I turn on the light switch the fan is controlled by, the fans (there's two on this model) come on, and will not turn off via the remote. The light itself turns on and off, but the "dim" button does not work. The wiring in the ceiling is very...

View more questions Search