Ask Experts Questions for FREE Help !
Ask
    huhu's Avatar
    huhu Posts: 4, Reputation: 1
    New Member
    		  
    #1

    May 9, 2009, 02:46 PM
    Polaris wheel not working in the pool
    Our 380 polaris' belt was broken. So we changed it. Now the belt is new and the wheels turn freely when we spin... but when we turn it on in the pool the wheels not turn.. any help appreciated.
    davum16's Avatar
    davum16 Posts: 19, Reputation: 1
    New Member
    		  
    #2

    Sep 1, 2009, 05:11 PM

    I'm having a similar problem. I have a pretty new booster pump (<6 months old) and get plenty of pressure at the cleaner (out the tail and the suction jets). But the wheels don't turn. Do I just have worn parts inside? I'm going to take it apart and have a look, but I was hoping someone on here can narrow it down for me. Or let me know if this is a lost cause and something I'll have to take it in for. Any help would be much appreciated.
    davum16's Avatar
    davum16 Posts: 19, Reputation: 1
    New Member
    		  
    #3

    Sep 1, 2009, 08:29 PM

    I really should have just opened it up first. The hose that carries water from the main feed to the front wheels had come off. It seems to have shrunk a bit over time so I replaced it. Very easy fix.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Polaris won't start [ 1 Answers ]

4 stroke 425 4x4 magnum. It began by not starting, but try again in 20 min. or so and would start fine. The 20 min. wait time kept getting longer until now it won't start even with a little shot of ether. This progressed over a period of 4 months.

Above ground pool vacuums not working. [ 2 Answers ]

Our above ground pool vacuums are not working properly. They are not vacuuming hardly at all. The manual one just floats out of the skimmer after a few minutes and the automatic one hardly moves at all. We have replaced all the hoses so they are all new and are not leaking the pump seems to be...

Timer on my Polaris [ 1 Answers ]

How do I connect the wiring for the motor that runs my Polaris? There are 5 ports (2 are for "line" and 2 are for "load")? Thanks.

Tilt-wheel steering wheel problem [ 1 Answers ]

On my 1998 Buick Park Ave the tilt-wheel will no longer change positions. A couple of days ago I got in the car, adjusted the steering wheel and heard something Pop. Since then, the steering wheel will only stay in that position. Does anyone know how I might go about fixing this problem? ...

View more questions Search