Ask Experts Questions for FREE Help !
Ask
    ausiedob's Avatar
    ausiedob Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 5, 2006, 12:21 PM
    Kenmore dishwasher won't fill at start
    Start button but water does not come in - when I cancel the start the drain pump starts to try pump water out so that works but the water does not come in at the beginning.
    Morganite's Avatar
    Morganite Posts: 863, Reputation: 86
    Senior Member
    		  
    #2

    Nov 5, 2006, 12:32 PM
    Quote Originally Posted by ausiedob
    start button but water does not come in - when I cancel the start the drain pump starts to try pump water out so that works but the water does not come in at the beginning.
    It could be a few things: Water sensor defunct; main contrrol defunct; pipe blocked, puppy turned the water tap off, etc.

    Check this site: http://hometips.com/home_probsolver/...ishwash02.html

    M:)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dishwasher won't start [ 25 Answers ]

Hi, I have a Kenmore Ultra Wash Dishwasher (model 665.1588) that will no longer start. Its roughly 4 years old. The Cancel/Drain button starts the 2 minute drain cycle, so I know its getting power. The China/Gentle light is the only cycle light that lights up (but I can't start it either). ...

Kenmore Ultra Wash Dishwasher model #665.1703, Flashing light-won't start [ 118 Answers ]

I have a Kenmore Ultra Wash Dishwasher. It will not start. The light above normal wash is flashing continuously. Any advice will be helpful. Our warranty ran out 9 days ago:rolleyes: Thank-you in advance:o

Kenmore Washer Won't Fill on Rinse Cycle [ 2 Answers ]

Everything else is working fine, it fills normal on wash, but not rinse, no matter what cycle such as perm press, ultraclean.

Kenmore Elite Dishwasher Won't Start [ 3 Answers ]

My dishwasher had been working for more than three years. Suddenly, it will not start and the Quick Rinse light is flashing. All control panel buttons became inactive. The Model/Serial is 665.15959000. I am trying to reset the dishwasher or run diagnostic so I can find out which part need to be...

Kenmore washer continues to fill [ 1 Answers ]

Hello. I have a Kenmore Elite Catalyst, model# 110.20052994. About a week ago, it would not drain. I even tried pressing the drain button on the control panel, but it did not work. So, I drained the water by hand and tried to run through another small load cycle. Now, the washer continues to...

View more questions Search