Ask Experts Questions for FREE Help !
Ask
    shodaisy's Avatar
    shodaisy Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Aug 31, 2009, 05:34 AM
    Husqvnarna Blades
    I have a 46 inch Husqvarna riding mower which cames with mulching blades. I would like to replace the mulching blades with regular blades. Could someone give me some websites where I can purchase these blades?

    Thanks
    RickJ's Avatar
    RickJ Posts: 7,762, Reputation: 864
    Uber Member
    		  
    #2

    Aug 31, 2009, 05:43 AM

    1. what is the model # of your mower?
    2. And what zip code are you in?

    Husqvarna has a decent website for parts and dealers, but to use it you need to input one or both of the above: Husqvarna - Global Leader in Outdoor Power Equipment
    1099669's Avatar
    1099669 Posts: 63, Reputation: 4
    Junior Member
    		  
    #3

    Aug 31, 2009, 06:37 AM

    Lowes.com
    Or you can go to your local Lowe's home improvement store and if they do not have it in stock they can special order it. I have a Husky also and I know I can get what I need for it at Lowe's
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #4

    Aug 31, 2009, 07:00 AM

    Hi,
    In addition to other mentioned item, they have two different 46" decks; 2 and 3 blade versions.
    Peace,
    Clarke
    shodaisy's Avatar
    shodaisy Posts: 5, Reputation: 1
    New Member
    		  
    #5

    Sep 1, 2009, 04:32 AM

    My mower is 46 inch with 2 blades. Model # YTH20K46, Serial # is 051509A002639, zip code is 41501. My local Lowe's has the mulching blades, what would be the conversion number for regular blades.

    Thanks
    1099669's Avatar
    1099669 Posts: 63, Reputation: 4
    Junior Member
    		  
    #6

    Sep 1, 2009, 05:20 AM
    Quote Originally Posted by shodaisy View Post
    My mower is 46 inch with 2 blades. Model # YTH20K46, Serial # is 051509A002639, zip code is 41501. My local lowes has the mulching blades, what would be the conversion number for regular blades.

    Thanks
    I don't know have you tried Husquvarna's web site?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #7

    Sep 1, 2009, 08:17 AM

    Hi,
    A search of the Husqvarna site yielded 42 dealers in the list:
    Total Source Dealer Locator ? Locate Local Husqvarna Dealers - Landowners
    And the IPL is at:
    http://weborder.husqvarna.com/order_...0/I0602057.pdf
    The blade listed is #532 40 53-80 and is referred to in the industry as a combination blade, meaning that it should discharge, mulch and bag. No other listed, though the important factors are the deck size, quantity required and the shape of the mount hole at the center (usually a 5-point star.)
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Locked fan blades [ 5 Answers ]

I replaced the pull chain for my ceiling fan light. When I got everything wired and ready to go the fan blades were locked. I have checked the pull chain for the fan blades but nothing seems to unlock them. I can hear the motor running for the blades they just won't move. Any ideas?

Mtd blades [ 3 Answers ]

How do I sharpen my mtd chipper/shredder blades

Engaging blades on MTD [ 1 Answers ]

When I engage the blades on my ridin lawn mower the engine sounds like it is choked down. I can engage the blades while the motor is idled down and then give it gas and it works fine. Any thoughts?

Ceiling Fan Doesn't Run with Blades on [ 13 Answers ]

The blades on my ceiling fan were loose. When I tightened them, the fan would not turn. I tried loosening them again to their previous position, but no luck. When I remove the blades, the assemble runs at full speed. When the blades are reattached, it does not run or runs very slowly. I have...

Blades won't engage [ 1 Answers ]

I have a Rally, made for Craftsman, model 18544B, 18.5 HP Briggs, 42 inch cut. I am told it was made byAYP. Blades have stopped engaging. I have replaced the PTO switch. Following the wires some lead to a plug in into the mower that is in the base of the frame on the right side, just above the...

View more questions Search