Ask Experts Questions for FREE Help !
Ask
    larkblack's Avatar
    larkblack Posts: 2, Reputation: 1
    New Member
     
    #1

    Nov 5, 2006, 08:08 AM
    Humidifier, wiring the control
    I have just installed an Aprilaire 700 Humidifier. I seems to work in the "test or reset mode" but that's all. I found the 24 volt transformer, as well as all the other thermostat wires. Some of the thermostat wires have voltage and some don't . This is depending on what the gas furnace is doing when it is running or starting to run. Anyhow I used the 24 volt power straight off the transformer so it's hot all the time. The instructions refer to the FURNACE ACCESSORY TERMINALS not sure where this is at. The transformer has terminals on it. 120volt on one side and 24volt on the other. Can somebody please help?? Thank you, Larry
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
     
    #2

    Nov 5, 2006, 01:50 PM
    You have all 6 wires hooked up to the humidistat? If your furnace doesn't have a humidifier terminal the easiest thing to do is go to the supply house and tell them you want a model A-50 current sensing relay. I think the instuctions are in the box, let me know. Also these relays don't work with D.C. smart motors.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Fan Control Center Wiring [ 5 Answers ]

I'm trying to make this old Magic Chef furnace work in my garage. I got it and the Fan Control Center was broken, laying inside unwired. I have no wiring diagram for this unit but the M# is G76-7502 C2-5. I need help wiring the fan control center and the fan limit switch to power. I bought a new...

Wiring Aprilaire 700 Humidifier [ 6 Answers ]

I am installing a Aprilaire 700 Humidifier on a Goodman GMNT gas furnace the Furnace control board is a white rogers 50T 35-730 it has separate hum 24v Terminal and hum 120v terminal the Aprilaire 700 Humidifier includes a built in 110v to 24v transformer which one should I connect it to and also...

Fan Control Center Wiring [ 12 Answers ]

Hi, I have an oil forced air furnace, with the fan controlled by a Honeywell L4064 fan limit control. The fan itself is capable of two speeds. I would like to add a fan control centre so that I can control the fan from a switch, hopefully able to select speeds. I gather adding a White-Rogers...

Wiring question for new blower control board [ 1 Answers ]

Just bought the Lennox blower control board replacement kit - 31M73 I'm stuck on wiring the transformer--- The five wires coming out of the transformer going to the old board are - Yellow - common Blue - 24 vac Orange-L2 XFMER Primary Black - L1 XFMER Primary Red - PARK

Wiring Remote Control Fan [ 3 Answers ]

My son just bought a Hampton Bay ceiling fan that came with a remote control. He really didn't want the remote and wanted it wired with the switches on the wall. However the only way you can reverse the fan direction is with the remote so he wants to use the switches on the wall for the fan and...


View more questions Search