Ask Experts Questions for FREE Help !
Ask
    helpinYonkers's Avatar
    helpinYonkers Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 30, 2009, 10:45 AM
    Putting oven-door hinge back into frame
    Recently, my dog opened up the oven door,and climbed onto it to get what was on the stove. The hinge holding the door snapped out of the frame to the oven. I can not push it back into place because there is a little projection on top of the hinge which prevents it from going back into the slot in the frame. What do I do... buy a new stove or dismantle the old one. (I have already thought of getting a new dog!) Thanks so much.
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Aug 30, 2009, 11:01 AM

    What brand a model? Maybe there is a schematic online of this model that can help.

    Don't ditch the dog.
    helpinYonkers's Avatar
    helpinYonkers Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Aug 30, 2009, 11:42 AM
    Of course the dog stays! There is no obvious brand name... perhaps on the back of the unit. I will try to get behind it.
    I hope I will not have to dismantle the door. Thanks.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Removing door hinge screws. [ 6 Answers ]

I am replacing my interior doors (12) with new ones including the brass hinges. They are the original ones in an 18 year old house. The doors are removed, but the hinges on the house frame side are stubborn to remove. That is, the wood screws are stuck in there. I believe they are brass and are...

Oven door back on and too high! [ 3 Answers ]

Indesit gas oven FG 10K GB I have removed my oven door to clean it and put it back on after. When I closed it, the door was too high up and is not sitting correct. I slotted the brackets into the holes and turned the catch 180 degrees and now I cannot move the catch back the 180 degrees to...

GE Electric Slide In Oven Door Hinge repair or replace [ 1 Answers ]

My oven door hinge is not functioning properly. When I open it the hinge does not open all the way and pulls on the door. Do I need to replace he hinge. You can see the metal pull on the door panel. The oven is 14 years old. Is is worth replacing the hinge or should we think about replacing...

Reset door hinge tension? [ 2 Answers ]

I have recently moved into my home and discovered the door going into the garage has self closing hinges. I need to know the procedure of how to reset the tension allowing the hinges to close the door?

Removing a self closing door hinge [ 2 Answers ]

I want to temporarily remove a self-closing door hinge (to install a dog door). Is there an easy way to do this without removing one half of the hinge from the door or jam (like removing the pins on standard hinges)? There are a couple of allen screws in the unit (one on top, one on the bottom of...

View more questions Search