Ask Experts Questions for FREE Help !
Ask
    akusu's Avatar
    akusu Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 4, 2006, 12:58 PM
    Boiler problem--after topping up pressure
    Hi all

    The pressure of my boiler dropped because I bled the radiators earlier today. I followed manual instructions to top up the pressure but the boiler still won't come on.

    Read somewhere that maybe it's because topping up pressure can bring air into the system?

    Any ideas on how to get it working again? I'm freezing and don't want fancy a cold shower anytime either...

    Thanks a lot
    NorthernHeat's Avatar
    NorthernHeat Posts: 1,455, Reputation: 132
    Ultra Member
    		  
    #2

    Nov 4, 2006, 01:35 PM
    Not enough information to help you. Does boiler have a low water cut-off maybe?
    akusu's Avatar
    akusu Posts: 2, Reputation: 1
    New Member
    		  
    #3

    Nov 4, 2006, 01:45 PM
    No worries, have just got it working

    Thanks anyway
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Boiler Pressure [ 5 Answers ]

I have just bled out the radiators to my hot water boiler. When I got to the last radiator upstairs, nothing came out. A lot of air, then nothing. I checked the pressure on the boiler and it read about zero. I turned on the system and the pressure went up to about 18 psi, that's about where it...

Drywall topping sq ft coverage [ 4 Answers ]

I would like to find out if any one knows about how much square foot coverage an average box of 3.5g of topping covers.

Another shower low pressure problem [ 3 Answers ]

I have read some of the other low pressure shower issues posted here but none seem quite the same. I don't have a one valve or three valve system. Mine is a two valve shower system... hot and cold. It is a shower, not a tub/shower. My problem is that the hot water pressure is really bad. I...

Gas valve pressure problem [ 1 Answers ]

I had an old Coleman Evcon furnace, the problem is when the flame came out doesn't come strong because the fleame stay right at the nozzle of valve pipe,

Pressure Problem [ 3 Answers ]

We recently moved into a 7 year old house that is on a well. This week we installed a new diswasher and in the process we shut off the hot water by turning the shower valve coming directly out of the hotwater heater. When we turned the valve back on a lot of black/brown gunk flowed out of the...

View more questions Search