Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Change speed on motor wiring.
[ 2 Answers ]
I have a lennox central air m\n gcs 20--- had a new motor installed about a two years ago The fan motor is set on high,with wires do I need to change to get a med-speed. Thank you.
3 speed reversible window fan wiring
[ 5 Answers ]
Hello - I took apart my old Westinghouse window fan to paint it and had to disconnect the capacitor, which was mounted to the frame. I could've sworn the capacitor leads were connected to (1) a green wire coming from the fan motor and (2) a terminal labeled S2 on the control switch. However, when...
3 speed fan wiring
[ 1 Answers ]
Is there a diagram to correctly wire a 3 speed fan switch
Wiring a 3 speed fan switch
[ 3 Answers ]
So here's my problem.. I moved into a new house to find out the fan switch on my ceiling fan is broke. I don't know the maker of the fan but I think I found a similar image of the fan (see below). There's 4 wires (black, purple, yellow, and orange) I would like to know the wiring configuration into...
Wiring 2 speed fan
[ 1 Answers ]
I have three wires running from the furnace to the electric air cleaner, black, red, and white. I want to run the fan on low, and high when there's a call for heat. Black and red wires have 120 volts. The red is connected to the black wire from the air cleaner and black is not connected. Where do... View more questions Search
|