Ask Experts Questions for FREE Help !
Ask
    bossmann's Avatar
    bossmann Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 25, 2009, 06:29 AM
    Replacement Belts Instruction for Murry Mowers
    Trying to find the instruction on how to replace the 2 Motion belts on a Murry 30 in riding mower, model 309311x692a, belt parts 37x114 and 37x115. Along with replacing the blade on the mower.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 25, 2009, 07:44 AM

    Hi,
    The manual is available here:
    http://bsintek.basco.com/BriggsDocum...ekmzCOLnfBhU7y
    And the belts are covered on page 22. Blade is covered a few pages before.
    Peace,
    Clarke
    larryblack's Avatar
    larryblack Posts: 1, Reputation: 1
    New Member
    		  
    #3

    Aug 18, 2010, 01:23 PM
    I have a Murrymower MDL20415x8E that is Surging Is This a Carb . Problem ora Govenor Problem The air vane and springs seem to be OK? Larry black at blacklarryj@ comcast.net Thank You!
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Used Murry [ 2 Answers ]

I pyrchased a used 14hp 42" cut rider 2 weeks ago. The seller told me had put a new belt on blade deck I used it for about 3 hours nad belt came off, I put back on and it came off again approx 30 min later and it got cut. I have bought a new belt and put it on Sunday and it started to burn and...

How to change drive belts on Yard Machine Mowers [ 1 Answers ]

We need to replace the two drive belts on our Yard Machine driving lawn mower, Model Series 660 through 679 purchased in 2003. Can't figure out what we have to take off the machine to get the belts off. One is a serpentine belt. The other is a standard belt. Also wondering if there are any...

Murry 46 chews up eng-deck belts? [ 16 Answers ]

Have a murry 46 older one.. for some reason it started to chew up the belt from engine to blades.. I have replaced the idler pulley and belt.. but when I start to cut (deep grass growing along with this problem).I can cut perhaps.. 200 feet and then the belt rides UNDER the idler pulley and gets...

Murry 42 lawn tractor drive belt replacement [ 1 Answers ]

I have a murry 42 inch lawn tractor, modle#425303X92, need info on how to change the drive belts, look like the deck will have to come off to gain excess. A belt diagram would help or instructions. Thanks... Jake101

Murry riding mower belt replacement diagram [ 1 Answers ]

where can I find a belt replacement diagram for a 38" cut murry riding mower (11hp,37x63belt size).

View more questions Search