Ask Experts Questions for FREE Help !
Ask
    ZINGEAR's Avatar
    ZINGEAR Posts: 3, Reputation: 1
    New Member
     
    #1

    Aug 24, 2009, 06:11 PM
    Pullchain reassembly
    I have the same problem as cassie with reassembling the pullchain for my hunter fan
    ceilingfanrepair's Avatar
    ceilingfanrepair Posts: 5,733, Reputation: 109
    Uber Member
     
    #2

    Sep 2, 2009, 06:47 PM

    Who's Cassie? What in the world are you talking about?

    Ceiling fan pullchain replacement and repair - Ceiling Fans N More

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Have an overhead pullchain light in the hall at the top of the stairs [ 1 Answers ]

I have a pullchain light that needs to be fixed. I would like to know if the pullchain part of the light can be fixed instead of buying a newone and if so how?

Ceiling fan speed woes after new pullchain switch install [ 3 Answers ]

I have put a new 3-speed, 4-wire pullchain switch in two of my Hunter ceiling fans. I am 95% sure I reattached the wires to the correct numbered positions -- black on L, green on 3, etc. The fastest speed works fine on both, but the other two speeds are the same on both -- the slowest speed. Would...

Adding a pullchain [ 2 Answers ]

I recently purchased a Hampton Bay ceiling fan with a remote control. The control is designed to be wired in and the fan speed and light to be activated by the control. There is no pull chain. I want to know if there is a way to add a pull chain to the fan. Any ideas?

Repairing Pullchain [ 2 Answers ]

Hello, Last night, I turned on my ceiling fan with the pullchain. The pullchain stuck on. I pulled apart the housing and removed the casing, but it appears the pullchain is completely stuck. Do I need to replace the whole casing, or can I fix the one I have?

Dryer Belt Reassembly [ 6 Answers ]

I replaced the rear bearing and I am having trouble with reassembly. Idler wheel assembly came apart in my hand. Any suggestions? " PLEASE HELP ":confused:


View more questions Search