Ask Experts Questions for FREE Help !
Ask
    mbhusa's Avatar
    mbhusa Posts: 3, Reputation: 1
    New Member
    		  
    #1

    Aug 22, 2009, 08:52 PM
    Kenmore Dryer model 11063012101 does not work
    The Kenmore dryer suddenly quit working. When set the time and temperature and then press start... Nothing happens, no noise or click or winding just like no start was pushed. I have taken the top back plate off to the point that the switches, timers, etc are exposed from behind and all wires and resistors on top control panel are accessible. I can run a continuity test if needed.
    Sam
    ackid's Avatar
    ackid Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Aug 23, 2009, 04:53 AM

    Check power to outlet ensure the breaker is completely set.
    Try again
    If not turn power off check the door interlock switch
    mbhusa's Avatar
    mbhusa Posts: 3, Reputation: 1
    New Member
    		  
    #3

    Aug 23, 2009, 06:08 PM
    When I hold the start button, I can hear the timer ticking, as soon as I let it (start / push button) go, it stops ticking. The power supply is 220/240 AC and I am going to check it with a multimeter. Where is the fusible link? By exhaust pipe? I cleaned the exhaust port, there were more than usual lints, not huge amount.
    mbhusa's Avatar
    mbhusa Posts: 3, Reputation: 1
    New Member
    		  
    #4

    Aug 23, 2009, 06:48 PM
    OK, I tried the power outlet and power distribution at the control panel, get 245 AC Volts between Black and Red, about 121 AC Volts between Red and White. I plugged the power cord, opened the door, the drum light comes on, close it, the light goes off. I can not find the door switch connectors to check my switch. Does door switch have two switch built in one? Normally Open, and Normally Closed and COM, I assume it is common wire and it is (white). What is the short cut to checking door switch? Do I have to take front panel off?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Back panel removal for kenmore dryer Model 11063012101 [ 1 Answers ]

How does one remove the back panel for a Kenmore Dryer mod# 11063012101. Thanks for you any help you give me.

Dryer not coming on Kenmore mod#11063012101 [ 2 Answers ]

Hi, can someone please help me? My dryer is not coming on. It's a Kenmore model #11063012101. If you have any advice on where to begin troubleshooting or if you have schematics that would be a great help. Hope to hear from somebody soon.

Kenmore gas dryer model 110 [ 1 Answers ]

I have a kenmore gas dryer approx 3 yrs old recently it quit working runs but does not heat I changed celonoid also thermostet/flame sensor help parts I used were from older model that I replaced in past

View more questions Search