Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Add city water to well system for sprinkler system.
[ 6 Answers ]
Hello, My sprinkler system runs off an irrigation well system with a bladder tank. The well has a 1HP Jet pump that will only pump 8 gpm @ 40-60 psi. As the system runs after 3-4 minutes the pressure will drop to 20 or so psi and the sprinkler heads start to drop. So I'm not getting enough water...
Septic system-ground saturation & diverter valve
[ 1 Answers ]
My house and septic system are 7 years old. I have had water standing at the lower half of the last leach line for some time. First only after a heavy rain, now all the time. This line is the last of five lines at the end of the leach field. Can I install a diverter valve to give this line a rest...
Connecting 12 volt system to ground
[ 4 Answers ]
So I got this idea to use a 12 volt pump that I can hook up to a 10watt solar panel hooked to a 12 volt battery I've got-- to run a little ornamental fountain for the goldfish pool out in the garden. The instructions that came with the panel, which I would say are "loosely translated from the...
Daylight basement water leak, cause by broken water pipe or saturated ground water?
[ 1 Answers ]
I have a 6 units 3 stories with daylight basement apartment. Build in 1960. Just bought it few months ago. Last year the previous owner had a bad flood in the daylight basement after long period of rain. They cleaned out the area, remodel it. Good for few months, last couple of weeks rain long...
How do I increase H2O pressure on well system with a water filtration system?
[ 2 Answers ]
Howdy, I would like to know how I can increase my water pressure. My current system uses a well pump with a small pressure tank, and "D" control valve. It then runs through a WATERSOFT filtration tank, RAINSOFT water softner, and on the Hot water side, an AQUASTAR on demand hot water system. I... View more questions Search
|