Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Old 4" Toilet Flange Soldered on; Keep it?
[ 7 Answers ]
I'm in the process of remodeling a bathroom in a 45 yr old house. After remove the first layer of the subfloor, that I'll be replacing with newer plywood, backer board, and then ceramic tile, the old toilet flange sticks up about 3/4". It was just about the wood before removal. It would end...
Flange for 3" toilet waste line in basement
[ 11 Answers ]
My basement was already plumbed and ready to be finished when I moved into the home. However, the guys imitating plumbers, not only put the toilet waste line to close to the concrete wall (a problem I have already remedied) they also put a 3" main toilet waste line. Question: Are there flanges...
Replacing toilet flange when pipe 2 1/4" below floor
[ 4 Answers ]
I've got a 4" cast iron waste line with a slab floor. The pipe is 2 1/4" below the floor surface. The replacement flanges I have found are only 3" long. Is this 3/4" enough for a good seal? Does anyone know if there are longer replacement flanges out there? Thanks
Extending a toilet flange up 5"
[ 1 Answers ]
I have a bathroom in a garage apartment which floods every time we get rain. :( I am in the process of installing drainage lines, but the elevation difference between the back of the yard and the front is marginal. The way it rains around here, flooding is always a risk. To mitigate the risk, I...
Installing new toilet flange to 3" galvanized
[ 3 Answers ]
I'm installing a new toilet in a basement and the plumbing was roughed in back in the early 40's. The problem I having is trying to find the right flange that will work with 3" galvanized pipe. From what I can see I don't believe it's cast iron, but it wouldn't suprise me if it is. I bought a 3"... View more questions Search
|