 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I was wondering if the green sheet rock will do just as well as cement board for installing in a show that I'm planning on tiling?
I had a volunteer mount a metal plaque on a brick wall in an outside courtyard a couple of days ago. I went and looked to be sure the work was done, and found that the plaque is where it should be on the brick wall, but there is a yellow contact adhesive dripping from the plaque down the brick...
I have an apartment where I put down vinyl composition tiles (1/8" VCT). The tenant covered about 125 square feet of it with stick-down tile. It's a lot of work, but the stick-down tiles can be removed one-by-one with a heat gun. The problem is, how do I remove the adhesive that remains on the...
What do you use for the joint where Cement board ends and Green board starts? Thinset still? Tile is only going halfway up the green board wall. Thinset would make sense on the lower tiled half. What about the upper?
I began to repair some cracked grout in my shower stall and as I was raking it out, 4 tiles just pushed into the wall. The cracks had let in water and the green board behind it was wet and crumbled. Can I patch this with a new piece of green board or should I have a pro come in and rip out all of...
View more questions Search
|
