Ask Experts Questions for FREE Help !
Ask
    dresser01's Avatar
    dresser01 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 18, 2009, 06:19 PM
    220 plug
    I have a 3 wire ark welder how do I wire the plug into the breaker
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
    		  
    #2

    Aug 18, 2009, 06:29 PM

    You add a breaker the proper amp of the welder, you run a special outlet to that breaker and then plug it in.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Change 4 wire dryer plug to 3 wire plug [ 1 Answers ]

How to change a 4 wire dryer plug to a 3 wire plug

Can I plug my electric oven into a normal plug socket? [ 2 Answers ]

Can I plug my electric single oven into a normal plug socket?

12-3 wiring from gfi plug to outlet to plug in a 110v pool pump [ 5 Answers ]

Need to verify proper wiring for above 110v pool pump.

Black soot on the spark plug,is it the plug. [ 1 Answers ]

My lawn mower plug has black soot on it, what could be the cause of the plug fouling out? It is a 6.0 B&S motor, also is there a certain gap for the plug and if so what is it? This problem just recently came up after 3 years of use and I don't understand what happen.:confused:

Replace 2-plug GFGI with a 4-plug GFCI? [ 7 Answers ]

I am remodeling my bathroom and my wife wants a 4 plug outlet. She currently uses one for the hair dryer and one to charge her electric toothbrush. The intent is to add a lighted mirror or something else that uses little power. Would it be OK to replace the GFCI with a 4 plug GFCI? I suspect...

View more questions Search