Ask Experts Questions for FREE Help !
Ask
    lawnchiefdeluxe's Avatar
    lawnchiefdeluxe Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 17, 2009, 03:29 PM
    i need s belt schematic for a lawn chief deluxe
    it has 2 belts one from engine to a double pulley then another belt from the double pulley to the transmission I needto know how to route the belt from the double pulley from the transmission the model number I go frm the back of it was 4-36516x57 thanks
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 17, 2009, 05:57 PM

    Hi,
    Your model number is a Murray number for an '84 model. See if this looks similar:
    http://www.mymowerparts.com/pdf/Murr...9/84-36508.pdf
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Lawn chief riding lawn mower forward and reverse [ 4 Answers ]

The lawn mower will not go forward or reverse, What should I check to fix this problem?

Lawn chief 600 14h twin II briggs [ 2 Answers ]

The safety switch for the seat on my tractor went bad and I want to know how I can bypass this safety switch. But the main problem is that the engine will turn over but will not run, it has good compression, getting good blue spark on both plugs, and is getting fuel. So if anyone can give me any...

Belt schematic [ 2 Answers ]

Craftsman ride on Mower. Need Lower deck Schematic for correct belt replacement

Wiring schematic for old Lowe's lawn mower [ 1 Answers ]

I am rebuilding an old Lowe's riding lawn mower that is approximately sixteen years old. I need to find a wiring schematic for that type of mower. Also, I have removed the mower deck so it can be used as a utility tractor and found there are a few safety switches that need to be bypassed. I have...

View more questions Search