Ask Experts Questions for FREE Help !
Ask
    Gailb's Avatar
    Gailb Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 17, 2009, 03:50 AM
    Water at pump but not in the house
    I just replaced my pump the first day it ran fine but now I can only get water at the pump and there is no pressure. Can someone help me out?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
    		  
    #2

    Aug 17, 2009, 05:40 AM
    Quote Originally Posted by Gailb View Post
    I just replaced my pump the first day it ran fine but now I can only get water at the pump and there is no pressure. Can someone help me out?
    I realize this may be a foolish question, but sometimes there are two shutoffs.
    One at the pump side on the house service line and another at the house. Are both valves open? Let me know, Tom
    jlisenbe's Avatar
    jlisenbe Posts: 5,020, Reputation: 157
    Uber Member
    		  
    #3

    Aug 17, 2009, 06:43 AM

    When you say there is no pressure, do you mean you are getting water at the pump but only a slow, low-pressure flow, or do you mean there is no pressure at the house?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No water in the house/well pump not working [ 12 Answers ]

I have a well house and a pump that is approximately 75 feet down. I had water today when I left today and upon my return 5 hours later there was no water in the house. I changed this pump approx 3 or 4 years ago... where do I begin to test? Could it be frozen?

Heat Pump leaks water under house [ 1 Answers ]

A room in my house gets a lot of moisture from the floor. There is a crawl space below the room where my heat pump air handler is. There is no insulation below the house. How can I terminate the moisture from the unit?

Breaker for underground water pump trips when a large volume of water is used [ 2 Answers ]

The breaker for the pump trips when the washer fills. Washer repair person said it is not the washer and pump repair person said the pump is working correctly. Breaker does not trip every time. Could it be a bad breaker?

New well pump.still not supplying the house with water [ 4 Answers ]

We were having problems with our well pump supplying very little water to our house. (About a gallon to three gallons every 20 minutes or so, then nothing) So we replaced the old 3/4 HP submersible pump with a brand new one. Now the water doesn't even reach the pressure switch.(NO water coming...

View more questions Search