 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Air handler wiring with hot water coil and 6006? Aquqstat
Installed goodman 3.5 ton air handler, that replaced old york unit that had fan center relay. a.c. works fine , but how do I wire in the aquastat, so the fan comes on for heat? Is it as simple as putting the 6006 to the fan wire on air handler? Won't that send 24 volts back up the t-stat?
|
||||
|
||||
|
You will probably need a isloation relay between the aquastat and the fan motor relay OR you will have to wire the fan motor with the contact end switch in the zone valve if so equipped.
Post exact model number and pictures of ALL wiring diagrams. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Converting an R22 A-Coil To a Water to Air Coil A friend of mine has a water to water geothermal unit for heating his home. He wants to use this same unit for cooling the house. Looking at water to air coils the prices are quite steep compared to the standard run of the mill A-Coils. We are...
When the switch is in the on position is there 12v power to the ignition coil on a four cylinder gas tractor?
Trying to take goodman air handler A-30 from straight ac and convert to heat pump fan coil only has three low voltage wires how do I go about wiring?
There is a goodman condensing unit outside and I am installing a duraguard airhandler my question is I have 5 wires for the thermastat red green wh/bl, wh/bk,brown I know my green is fan my red is power and my brown is common on the diagram it has w2 is the white and blue and the wh/black is w1. On...
I've read many of the previous questions/answers, but haven't found what I need. Low voltage wiring is not my strong suit. My AHU has a hot water coil in it, that I plan to heat with a Voyager water heater. It has an A/C coil, and that works fine. Previous answers have said that I should find a...
View more questions Search
|
