 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
1999 dakota 2.5 ltr truck
I drove my truck 590 miles it ran perfect. Then 45 min latter after stoping it just won't start codes now say po320 crank potion sencer is malfunktiong so were do I find it on a 2.5 ltr and way would it just go bad for no reson is the only resone the truck won't start there is a nother code about secondary emition controls on vehicale its p1942 but I can't get any info on that one can any one please help me?
|
||||
|
||||
|
Because of the location of the Crankshaft Position Sensor to the crankshaft, and its exposure to the elements (e.g. water), they are prone to failure (quite common). It's likely mounted to the engine block, with two 10 mm bolts, off to the side of the harmonic balancer. Should be very easy to replace. Disconnect the negative battery terminal first, after recording any radio codes.
Here's what it looks like and costs: http://www.autozone.com/autozone/cat...dName=Duralast |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
1999 Dodge Ram 1500 truck- When you turn off the truck and take the key out of the igination, the radio stays on and sometimes the overhead light stays on. This then drains the battery. What should I look for to fix and where should I look.:)
I agreed to let friend park truck w camper on my property. After a few months I told him to move it off or pay rent. He moved it but a month later parked it there without a word . Called called person told him he had to pay rent to park on property. Its going on 4 months ,no payment .talked last...
How to change bulbs in radio and heater control cluster?
3.9 89 Dodge Dakota usually starts well but may stall and be difficult to restart. Have replaced coil and spark plug wires also disconnected EGR valve. The problem is it dies while idling. Any ideas on how to stop this from happening?
View more questions Search
|
