Ask Experts Questions for FREE Help !
Ask
    mudweiser's Avatar
    mudweiser Posts: 2,750, Reputation: 707
    Ultra Member
     
    #1

    Aug 8, 2009, 01:59 PM
    Routers? How to purchase one and what to look for.
    Hi I need a router for my laptop- I have wireless and get connect to wherever I can, but the connection goes on and off-- I'm tired of it.

    I don't know anything about routers, only that you can connect it to the internet and use it on your laptop- right?.

    Anyway, before I enter the store to buy one I'd like to know what I should be looking for - I don't want to be conned into buying the most expensive one.



    I've tried Googling this, but all I get is a whole bunch of mumbo jumbo I don't really understand-- so bear with me.

    Thanks!

    Sarah
    justcurious55's Avatar
    justcurious55 Posts: 4,360, Reputation: 790
    Ultra Member
     
    #2

    Aug 8, 2009, 03:49 PM

    My boyfriend recommends lynksis routers. My aunt used to have some other one that was always disconnecting too. It finally just burnt out completely and he replaced it with a lynksis. She doesn't have problem with it anymore. I have a lynksis router too and I never experience any problems.
    mudweiser's Avatar
    mudweiser Posts: 2,750, Reputation: 707
    Ultra Member
     
    #3

    Aug 8, 2009, 04:16 PM

    Okay thanks-- is there just one type of Lynksis router?

    Thanks justcurious for the quick reply:)

    Sarah
    J_9's Avatar
    J_9 Posts: 40,298, Reputation: 5646
    Expert
     
    #4

    Aug 8, 2009, 04:19 PM
    I have the Linsys 2.4GHz router connected to my PC so that my laptop will get access throughout the home and about 200 feet or more beyond.
    mudweiser's Avatar
    mudweiser Posts: 2,750, Reputation: 707
    Ultra Member
     
    #5

    Aug 8, 2009, 05:14 PM

    Oh thanks J.

    Is 2.4GHz good?

    I have fast internet connection installed at home, I heard that some routers are slow even if you have high speed internet- if that's true then what type of router should I be looking for if I want high speed internet?

    Hope I made sense.

    Sarah
    J_9's Avatar
    J_9 Posts: 40,298, Reputation: 5646
    Expert
     
    #6

    Aug 8, 2009, 05:30 PM
    I'm loving it. It's the Linksys Wireless-G. Works wonders.
    justcurious55's Avatar
    justcurious55 Posts: 4,360, Reputation: 790
    Ultra Member
     
    #7

    Aug 8, 2009, 07:46 PM

    There are N band routers out now. They are much faster than G band for wireless and LAN. With the N band you can get up to 1000 mbps (LAN) and 270 mbps (Wireless). The G band is 100 mbps (LAN) and 54 (Wireless). If you get a 2.4 Ghz router then 2.4 Ghz telephones may interfere with your signal. They do make 5 something Ghz routers. Those should not have any interference.

    And that up there is what my boyfriend says. Not me, I'm not the computer whiz :)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Concerning Routers And Hub? [ 4 Answers ]

I am doing an assignment work on Router & Hub for my studies:eek:.. Too be honest I have very little idea what these are:( and I am pretty much confused about both topics:confused:... answer the following as precisely as possible so that I have a clear idea. And then be able to search more on...

Wireless routers [ 1 Answers ]

My friends partner has bought her a wireless router for her for her home,he set it up through his laptop, when he is not there she can not get online without him being there with his laptop,(he does not live there), he has also put a password in without telling her what it is, how can she get round...

Routers and DSL [ 4 Answers ]

My default gateway is 10.0.1.1 at home. It's still a private address. DHCP addresses are low numbers (2 computers and a radio) with yearly leases and the fixed IP addresses for printers are high numbers. I can't get to my DSL modem because I am operating in Bridge mode. If anybody can explain...

Using routers as switches? [ 2 Answers ]

Hi, I'm about to build a network of nearly 15 computers and a server for the company I work for. Because of the locations of these computers in the building, I'll need to use 4 switches to get them all hooked up. I was wondering if it is possible to use routers instead of switches and if there...

ISDN and Routers [ 6 Answers ]

Here's my problem. I have an older Cisco 1003 ISDN router setup for one of my software suppliers to access a server on my network. It only allows access to one IP address, the box they support. Now I need to change the routing table to allow access to two other IP's for remote desktop...


View more questions Search