Ask Experts Questions for FREE Help !
Ask
    guchimero's Avatar
    guchimero Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 6, 2009, 05:25 PM
    Washing machine won't spin
    It starts fine, but when the timer gets into drain and spin it goes dead. Is there a switch or a relay that's bad?
    twinkiedooter's Avatar
    twinkiedooter Posts: 12,172, Reputation: 1054
    Uber Member
    		  
    #2

    Aug 7, 2009, 10:53 AM

    The problem is probably the lid switch gone bad. Easy fix once you get the replacement part. Basically the lid switch is a safety device that keeps the tub from spinning and you being able to lift the lid and stick your hand into the spinning tub.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washing Machine won't spin [ 1 Answers ]

My GE washing machine WWA8360GAL is noisy when water is filling the tub and used to screech when going into the spin cycle. Now it goes into the spin cycle only intermittantly, however the water will drain from the tub. Watched it operate with the back cover removed and noticed: 1) there is a very...

Washing Machine won't spin [ 1 Answers ]

I have a Kenmore Washing machin 80 series and it won't spin. When I put it on spin it just makes a humming sound. Does this machine have a belt or could it be my transmission

Washing machine won't spin or drain [ 1 Answers ]

I have a frigidaire washing machine, it won't drain or spin, I replaced the door switch and the timer, still nothing

Washing machine drum won't spin [ 1 Answers ]

When I switch the washing machine on, it starts to work normally but the drum will not turn yet you can hear the turning and the spinning sounds. I check to clean the drainer and all other links to the drainer and the drum will not spin.

View more questions Search