Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
No caulk shower drain
[ 3 Answers ]
I have a leaking upstairs shower. I have cut out a section of the drywall and have Access to the trap and drain. The stub coming from the trap to the drain moves Inside the no caulk drain. I am not sure how much of the stub should be inside the drain And if the top of the stub should be...
Caulk and grout in shower
[ 1 Answers ]
I recently replaced some tiles on my shower floor and walls. I scraped out as much grout (it didn't look like caulk) as I could at the wall joints and the floor/wall joints, but didn't get most of it out. Then I put sanded grout in the joints and over the old grout, but after doing further reading...
No Caulk PVC shower drain
[ 8 Answers ]
I just installed an acrylic shower base and an initial test reveals a leak between the drain body and the drain pipe. The drain body just presses over the drain pipe and squeezes through the rubber caulking gasket, so there is nothing to tighten internally once the drain pipe is in. Can anyone...
Caulk vs. Grout in the shower
[ 2 Answers ]
Hi. I have a shower with tile on both the walls and floor. It is a natural stone type tile. The grout (at least I think it is grout) at the joint where the wall tile meets the floor tile has turned black with mold and/or mildew and I need to replace it. I think the cause is inadequate...
No-Caulk Shower Drain
[ 3 Answers ]
Hello, I am remodeling a bathroom with a shower (no tub). I have replaced the leaking 2" trap and I am getting ready to install a new marble shower receptor. I purchased a Jones Plumbest 2" D40-140 no-caulk brass drain fitting that comes with a compression gasket for the riser pipe, and 2... View more questions Search
|