 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Whirlpool 6th Sense AW5121 won't advance to next cycle
I have a Whirlpool Aw5121 front loader. It will not advance to the next wash cycle, just stops and flashes. It has been doing it for the last couple of months but no I can't get the filter out its like its jammed and the water won't pump out anymore. Could it be the pump or due to the filter being stuck with something in it. Can you access the filter from underneath the washing machine?
|
||||
Check out some similar questions!
My whirlpool washing machine goes out of balance every time it goes into the spin cycle. It's a mdl. LSR 5232LQ1 Any ideas
I have a whirlpool dryer that will run for 30 to 40 minutes before shutting off. I have cleaned the lint filter and made sure I have air flow in the vent. If I let it cool off it will run for another 5 to 15 minutes before shutting off again. Any ideas about what else may be the problem? I also...
Added load to washer, seleted cycle, after about one minute into the cycle, washer stops indicating error message F4. Idea of problem? DIY repair or better left to the repair professionals - thanks
Just bought a new whirlpool washer (MD#: WTW5790SQ0), the spin cycle on the washer doesn't work on any cycle EXCEPT normal wash. This was determined by: closing the lid, selecting each individual spin option on the dial and pulling the knob out (starts washer). Both spin cycles work on the Normal...
My whirlpool washing machine model LA9500T suddenly today stopped advancing from cycle to cycle. It fills water correctly and goes into agitator cycle. It then keeps agitating until I manually advance to next cycle, on and on. What can I do to fix this and is it repairable by me (I can do small...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
