Ask Experts Questions for FREE Help !
Ask
    bullrun's Avatar
    bullrun Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Aug 3, 2009, 07:28 PM
    Recoil starter
    How to repair recoil starter for a 6.5 tecumseh engine on walk behind mower. It has two pawls that I can't get to work. The fall out on first pull of rope? Thanks bullrun . Great site
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 3, 2009, 09:23 PM

    Hi,
    The starters are made by a different company. How about some engine numbers so I can look it up. Some have one pawl, some have two. Some have metal, some have plastic.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Re-attach cord on tecumseh snow king recoil starter [ 11 Answers ]

My cord to the recoil starter on my snowblower broke at the base. I have unbolted the starter from the engine and brought it inside. It is looking like I have to take apart the unit just to push the cord into its slot as there is very little finger room to work with. The starter is on an 11...

Recoil starter won't work [ 1 Answers ]

Hello, I have an old Lawn core aerator made by Aquafier in PA. I am currently having a problem with the recoil starter where it extends fully when pulled and retracts fully when you release tension on the rope. However, the action of pulling the rope does not engage or turn the engine in the...

B&S Recoil starter assembly instructions/diagram [ 2 Answers ]

Need assembly instructions/diagram for B&S 8 hp model 190432 recoil starter.

Briggs Recoil (pull) starter repair [ 4 Answers ]

Briggs Recoil (pull) starter repair My wood splitter has a Briggs gas engine, when I pull it and it starts I get a screech sound from the pull rope area. It did it a few different times after it started on other occasions. Today it screeched more often and I noticed the pull rope would come out...

Reassemble Mower starter cord recoil [ 1 Answers ]

My mower's power cord looked like it was about to break. So I purchased a replacement cord and sought instructions on the web. Unfortunately the instructions I found weren't consistent with the design of the Briggs and Stratton engine on my mower. The instructions show how to replace a coed...

View more questions Search