Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Water pump motor drawing high amps at start up
[ 3 Answers ]
I have a 240 volt motor for our water pump that draws high amps for a long period when it turns on. I know that the motor will draw high amps at start up, but the high amps stays high for about 8 to 10 seconds. The pump and motor are in a pit with an air bladder. Is there anything I can do so...
A/C Won't Start but Furnace Working
[ 6 Answers ]
Trane Split System 2TTR3036A1000A, 2 yrs old Hi. The furnace works fine. But when set to cool, neither the air handler or the compressor operate. Also, the "fan only" setting does not run the fan. I checked the 2 A slow-blow fuse on the board, and it's fine, but I assume that the furnace...
Drawing ssd and working under the table
[ 1 Answers ]
I've been on disability for a few years and I have worked under the table as a private caregiver. This year one of my clients decide to file taxes on the workers. I've saved all my check stubs and I was wondering if it's to late to file as an independent and pay my own taxes or am I just in...
H4-H1 - when can you start working?
[ 1 Answers ]
Hi - I am currently on a H4 visa and I have an employer who is willing to file an H1B visa for me ? When can I start working ? My H4 visa is currently valid until Sept 2009. Will this be a "change in status" and does it mean that I can start working as soon as I get the approval from the USCIS?
Start Up not working
[ 4 Answers ]
Hi everyone... thanks in advance for any tip or help.. my CPU is flashing yellow on the start up button.. I have disconnected yet nothing is working... any advice?? Thanks... :) View more questions Search
|