Ask Experts Questions for FREE Help !
Ask
    snapper guy's Avatar
    snapper guy Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 29, 2009, 08:42 AM
    Change a clutch belt on V212P4 snapper
    How do I change the belt which controls the self propelled mechanism on a V212P4 Snapper 21 inch lawn mower?
    Thanks.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 29, 2009, 07:42 PM

    Hi,
    I gather you mean the one on the left going ot the differential. The bolts to the guide on the differential must be loosened to get access there. The hex shaft must be partially disassembled. I do that with an adjustable wrenck on the hex shaft and a 9/16" wrench or socket to take off the locknut outboard of the left handle bracket. The shaft can be slipped inward, the pulley has a hex area the shaft fits in. The belt can be slipped on the differential pulley, the idler and up to the pulley on the hex shaft which can be slid back the othe direction and reassmbled. Tighten the bolts on the differential guide and you are done.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Snapper mower belt replacement [ 3 Answers ]

How do I replace the mower belt blade for a snapper model 3312x6sr rear engine mower? Is there a trick getting it attached in the rear? Is there a diagram?

How to replace the clutch on a snapper rider mower [ 1 Answers ]

How do you replace the clutch on a Snapper Riding mower? I have a 1992 Snapper model 301413KVE. Thanks

View more questions Search