Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Lennox G20 2a fuse on circuit board blows
[ 8 Answers ]
The 2a fast blow fuse blows immediately on this G20e. Can not tell from schematic what the cause might be. Anybody have this problem before. What part or parts need to be replaced? Cost of parts? (this is the fuse on the circuit board that is visible when the fron covers are off the...
Goodman furnace blows circuit breaker
[ 1 Answers ]
I have a goodman furnace which has been running fine for several years. Now whenever the thermostat calls for heat or AC the circuit breaker is tripped. I had to have work done to another furnace and when the man saw this furnace he said it was notorious for bad relays and to replace that before...
AC blows circuit breaker
[ 5 Answers ]
I noticed that the blower fan was running but AC was not cooling. I checked circuit breaker and it was open. When I reset the circuit breaker, the compressor fan ran for a few seconds and then shuts down again. The circuit breaker was tripped again. I would appreciate any help
Hampton bay ceiling fan light blows circuit breaker
[ 1 Answers ]
I purchased an energy saver coiled light bulb for my ceiling fan and it blew the circuit breaker for the living room. I removed the bulb and placed the original bulb in and it still pops the breaker. I have also replaced the pull chain light switch for the fan. Any ideas?
Turning on A/C blows 3amp fuse on circuit board
[ 1 Answers ]
Hi, Hope someone can help me. As stated in the title, when ever I turn the a/c on it blows the 3 amp fuse on the board. The system works fine with heat on. It's only when I activate the a/c does it burn. I have no idea what is causing the fuse to blow. Does anyone have any ideas of where I can... View more questions Search
|