Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Wiring Shed for 20A Using 12/2 and 115 Recepticles
[ 6 Answers ]
A novice here... Have a shed with current 115v service. I want to go to 220 using 12/2. My understanding is, black and white wires go together and then you have the (bare) ground. My current recepticles are 115 ( I think) two poles on each side. I believe the ground is pigtailed. My...
Change of code regarding recepticles?
[ 6 Answers ]
Last year I ran a subpanel and all wiring to an addition on a house and passed the underwriters inspection. In the process, I learned about calculating the number of wires and switches or outlet's that can be placed in a receptacle box. I was told (by the underwriter) that when you look at a...
Wall recepticles not working
[ 6 Answers ]
This morning one wall of recepticles stopped working. The fridge is on one of them and was on earlier then suddenly stopped. I checked the two GFI's that run in the kitchen (one under the sink and one on the breaker box). How can I figure out what happened? I am not even sure if I know which...
Wiring ceiling fan switch and light switch
[ 1 Answers ]
I had to replace the flywheel on my Hunter ceiling fan and I had to remove the light kit that was attached. After I installed the flywheel, I forgot to mark the wires for re-connection. This is an older model fan. There are five wires coming from the fan motor--brown, blue, white, black and... View more questions Search
|