Ask Experts Questions for FREE Help !
Ask
    sorth's Avatar
    sorth Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jul 20, 2009, 12:43 PM
    Dryer belt is OK, drum will not spin.
    GE Dryer GEW9200LW. Panel works, door is closed fully, drum will turn manually. When ''Start'' button is pushed, the machine clicks, but drum will not turn. Have checked: belt is intact; has not slipped off idler.
    Wood91's Avatar
    Wood91 Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Jul 20, 2009, 03:31 PM

    Remove belt from motor & turn on. Motor may have gone bad.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Washing machine will not drain. The drum will not spin. [ 1 Answers ]

Washing machine will not drain. The drum will not spin. It make a loud whirring/grinding noise. There is no obvious blockage and have checked the pump. The pump is working fine and the impeller spins. Is this a blockage in the pipe or something else

Removing washer spin drum [ 1 Answers ]

I have an Estate Heavy Duty washing machine and I am trying to remove the washer spin drum is there a trick to removing it need help thanks

Drum won't turn, belt good Frigidaire dryer [ 1 Answers ]

Just replaced heating element on frigidaire dryer fde647rfs0. Put dryer back together and drum will not turn. Motor is turning, and drum turns by hand. But when machine is put back together the belt is not turning the drum. Belt is correct according to schematics. Any suggestions.

Washing machine drum won't spin [ 1 Answers ]

When I switch the washing machine on, it starts to work normally but the drum will not turn yet you can hear the turning and the spinning sounds. I check to clean the drainer and all other links to the drainer and the drum will not spin.

View more questions Search