Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Craftsman riding mower engine stops when blades are engaged
[ 15 Answers ]
I have a Craftsman 'Garden Tractor', model number: 917.273070. It has a Kohler engine (model number: CV22S, type number: 75534). The engine starts fine and will run without any issues in all gears. However, immediately once I engage the blade clutch the engine begins to stall. If I place the...
Snapper rear engine mower stops running
[ 3 Answers ]
I have a Snapper rear engine riding mower with a 13.5 HP engine. Runs for a short time but dies out. I've changed the fuel filter and cleaned the air filter. Seems to idle OK but after I put it in gear and run a couple of minutes it starts to die out. If I choke it, it will start and run for a...
Engaging the Attachment Clutch on my Craftsman Mower kills the engine!
[ 4 Answers ]
I just got a brand new Craftsman lawn tractor, delivered this morning, already assembled even. I read the manual, more than once, filled the gas, checked the oil, checked the tire pressure, did everything I was directed to do. Started up fine and I let it warm up. But whenever I try to engage...
John Deere L120 - engaging mower deck stall tractor
[ 1 Answers ]
When I engage the mower deck on my JD L120, this one is from a JD not Lowe's or HD, the tractor stalls. Manually pulling on the belts I am able to turn the blades. Tractor is 3 years old and used for residential moving.
B&S 20HP Vanguard V> Black smoke when engaging mower Deck
[ 3 Answers ]
Hello there, I am new to site... I have a john deere lawn tractor with Briggs 20 hp vanguard Twin motor. When I either go from idel up to full throttle fast or I am at full throttle and engage mower deck, then engine surges and black smoke billows out. I have replace the crank breather and... View more questions Search
|